spare Parts


for Revox B77
The list of spare parts is getting longer and longer! That is why we are bringing together the spare parts and accessories that are exclusively for all Revox B77 here and hope that it will be clearer!
in-house productions

High-quality components and circuit boards developed and manufactured by us
Oszillatorspule Revox B77 von revox-online

Oszillator PCB Revox B77

The oscillator coils are wound in-house. The current for the relays no longer flows through the REC display, modern SMD assembly, current relays and other components. Enable indicator on the circuit board. The jumpers are replaced by tin bridges.
further information
Monitorplatine Revox B77 von revox-online

Record PCB Revox B77

The new record board can be set for all Revox B77s via two equalizer boards. We at revox-online have also made very wide and 70 µm thick conductor tracks, record and power LEDs, which can be technically improved!
further information
Monitorplatine Revox B77 von revox-online

Monitor PCB Revox B77

Current relays, peak LEDs on the respective trimmer, separate voltage dividers, power and mute LEDs, wide and 70 µm thick conductor tracks, we at revox-online have also done what is technically feasible!
further information
Input circuit board Revox B77 from revox-online

Input PCB Revox B77

Hard to recognize! The new input board of the Revox B77. Low-noise OP amplifiers and transistors as well as the absence of electrolytic capacitors are obligatory. Here, too, the amplifier stages are individually blocked. The circuit stayed!
further information
reproduce pcb Revox B77 from revox-online

Reproduce PCB B77

Completely revised! No, the circuit technology comes from Revox and Studer. We "only" made refinements and made the board more flexible. In addition, the playback is now adjusted via 8 trimmers. This means that the adjustability of the Revox B77 is much better than ever before!
further information
LED VU meter lighting from revox-online

LED VU meter lighting

New LED lighting for the VU meters for the Revox B77 and PR99. The LEDs are connected in series and are therefore particularly energy-efficient. This is possible because the LEDs only have between 2.0 V and 3.5 V. We only use white sockets and do not require a circuit board. For the homogeneous illumination of the VU meter, the light-emitting diodes are mounted so that they radiate to the rear.
further information
new tape drive control B77 from revox-online

Tape drive control B77


New drive control 1.177.318 for all Revox B77 tape machines with many optimizations, better and faster braking, less power consumption, galvanic isolation of the voltages, no electrolytic capacitors, etc.
further information
Brand new power supply board for all Studer Revox B77

Power supply board B77

New power supply board 1.177.313 for all Revue B77 MK I and MK II. The power supply for the sound motor control is completely separated from the power supply for the audio unit. The printed circuit board has been developed and manufactured according to the current state of knowledge for audio power supplies! The new power supply board is 1 to 1 interchangeable!
further information
tape tension switch Revox B77 from revox-online

Tape Tension B77


New tape tension switch for all Revox B77 to query the set speed and the selected spool size. With the B77 MKII, both are always queried! Why not with the Revox B77 MKI?
further information
Dogpin, driver for Revox B77 from revox-online

Dogpin

Driver for all Revox Studer B77 and PR99.
The driver is located on the pressure arm and ensures that the tape is lifted from the heads or rests against the heads during record and play! The old plastic parts are breaking apart more and more often.(image similar)
further information
Replacement for TBA 931, TBA231, µA 739, RC4739

Replacement TBA931


The original double OP amplifier in the 14-pin housing is also no longer available. The IC or the equivalent circuit can be found on the input circuit board and in the capstan control of the Revox B77.
to the shop
revox-online 15 mm RCA extension

Distance extension RCA

With this distance extension of the cinch sockets, you can use all high-quality cables from well-known manufacturers on the Revox B77. Only the original revox-online extension has a distance of 15 mm! What use is a distance of 13 mm to you if you are still severely restricted?
further information
Exchange for ITT A26xx relay 5V, 12V, 18V, 24V

Relay for ITT


Since 2008 we have been manufacturing replacements for various relays for maintaining Revox devices. Our relays have a switching capacity of up to 2 amps - like the original relay.
The relay ITT A26xx sits on the monitor board.

further information
Replacement relay NF 2 EB, NF 4 EB, AZ 2C, AZ 4C

Relay for LF x EB

As with the ITT A26xx relay, we manufacture a replacement for the relays NF 2 EB and NF 4 EB or AZ7-2C and AZ7-4C.
There are 2 relays NF 2 EB or AZ7-2C on the oscillator circuit board of the B77. Only with the PR99 can there be two NF 4 EB or AZ7-4C on the oscillator circuit board
further information
Digital counter for Revox A77
and Revox B77

- 4-digit display
- LED technology
- easy installation
- two solder joints
Counter 77 for all Revox A77, B77 and PR99 MK I

Counter 77


In 2003 the first digital meter was created for all Revox A77, B77 and PR99 MKI.
As with the analogue counter, only the speed of the right winding motor is recorded here. There are two counts per revolution.

All digital counters come with 7 different colored filter foils. This gives you the opportunity to set the color on site or change it at any time. It couldn't be more flexible!
further information
LED record display, Revox B77, PR99 from revox-online

Assembled LEDs

Record display for all Revox B77 and PR99 tape machines. The LEDs match the original displays 100% in terms of brightness and color.
to the shop
Spare parts specially made for us

Replacement parts specially manufactured to our own exacting standards
Brand new butterfly heads from revox-online

new butterfly heads

We can give you brand new ones Offer butterfly heads for all Revox tape machines. Thanks to the good cooperation with the company photovox, we have been able to offer you brand-new standard and butterfly tape heads for your tape recorders.
further information
Brand new brake bands for revox b77 from revox-online

new brake bands

Brake bands from new production suitable for all Revox A77, B77, PR99, A700 and C270, C274 and C278 in top quality, packed individually in a special packaging!
From revox-online, of course
further information
B77 Toggle switch lever, metal, the original, the best

toggle switch lever

The weak points of the toggle switches are the plastic levers. Since there were no more new switches, we immediately started developing and manufacturing this replacement part.
further information
B77 Trident, black clamping sleeve from revox-online

Clamp sleeve black

New black anodized clamping sleeves with silver-colored screw to match the original black plastic clamping sleeves for all Revox and Studer tape machines.
Not suitable for open coils!
to the shop
Trident, clamping sleeve metal, Revox Studer B77

ferrule (trident)


We have new clamping sleeves, also known as tridents, manufactured in 2 sizes and are suitable for all Revox and Studer tape machines.

to the shop
Power cable for Revox devices, 2.5 m, grey for revox b77

power cord

We also have two-pole mains cables made for us!
- 2.50 m long,grey, angled connector
to the shop
pinch rollers for
Revox B77, Revox PR99....

- real rubber
- maintenance free
-Sintered bronze bearings
- Round grind
-Made in Germany
Precision pinch roller B77 from revox-online

Pinch roller Revox B77

For Revox B77, A700, PR99 and C270 as well as many Studer tape machines for 1/4" tapes.
Anyone who has ever seen the damage green pinch rollers can cause understands why we have tried to make our own pinch rollers. Here, too, the highest quality was our priority.
All pinch rollers are oiled for the lifetime of the pinch rollers.
further information
Accessories for mounting the Revox pinch rollers

Pinch roller accessories

In addition to the high-quality pressure rollers, we offer you suitable accessories such as:
- Copper washers suitable for Revox B77, PR99
- Sliding washers suitable for Revox A77, B77...
- Sliding washers suitable for Revox B710, B215...
- Shaft circlips for the tape decks
- Sintered bearing oil

revox-online-shop

These and many other high-quality spare parts are available in our revox online shop
to the shop
Share by: