Equalization circuit boards
for all Studer A80 and B62


For recording and playback
We offer the equalization boards fully assembled for every equalization of the recording and playback.
Of course, we also offer you these circuit boards of the highest quality and in SMD technology.
Studer 1.080.880 NAB-EQ 38/76 cm/s

1.081.880

In the photo is the equalization for the shot
with NAB and 38 cm / sec and 76 cm / sec. to see.
An unusual combination, the high speed and then NAB equalized!
The equalizations are:
CCIR with 19 cm / s and 38 cm / s
NAB  with 19 cm / s and 38 cm / s
CCIR with 9.5 cm / s and 19 cm / s
CCIR with 38 cm / s and 76 cm / s
NAB  with 38 cm / s and 76 cm / s

1 set (4 pieces)


To change the speed or equalization, you always need two circuit boards for recording and two circuit boards for playback. If you "only" want to carry out a repair, the circuit boards should be replaced in pairs. So 2 times recording or twice playback.
As with the Studer A101 hybrid amplifier module, SMD technology is clearly an advantage.
Studer A80 EQ-PCB  complete kit revox-online
Studer A80 record PCB

Recording equalization


The following equalizations are available for the Studer A80:
CCIR 19 cm / s and 38 cm / s 1,080,920
NAB 19 cm / s and 38 cm / s 1.080.922
CCIR 9.5 cm / s and 19 cm / s 1.080.924
CCIR 38 cm / s and 76 cm / s 1,080,926
NAB 38 cm / s and 76 cm / s 1,080,928
NAB 38 cm / s and 76 cm / s 1.081.880

Playback equalization


The following equalizations are available for playback:
CCIR 19 cm / s and 38 cm / s 1,080,921
NAB  19 cm / s and 38 cm / s 1,080,923
CCIR 9.5 cm / s and 19 cm / s 1.080.925
CCIR 38 cm / s and 76 cm / s 1,080,927
NAB  38 cm / s and 76 cm / s 1,080,929
NAB  38 cm / s and 76 cm / s 1,081,881
NAB  38 cm / s and 76 cm / s 1,081,882
Studer A80 Play-EQ-PCB revox-online
the correct installation
Studer A80 slot for EQ

slot


Slots for the equalization are provided on the circuit boards of the recording 1,080,982 and the playback 1,080,986. 4 equalizer circuit boards are required for the Studer A80.
The coding takes place through an elongated hole in the recording and playback circuit boards

Coding


The coding of the original Studer equalization boards was done with a pressed pin. We will only leave the appropriate opening blank and cover the other opening in color (red for the recording and green for the playback equalization). The circuit boards are too small to label the type of equalization and its speed.
Studer A80 Pin for EQ
Studer A80 EQ installation

Installation


If the free hole of the equalization board and the slot of the Studer recording board or playback board are congruent, the combination is correct. The color scheme, green for playback and red for recording, should also fit. 

Shipping


The circuit boards are also sent in labeled ESD bags with the equalization , the speed and the Studer article number.
This should rule out any mix-up for years to come!
Studer A80 EQ Pin
further spare parts for Studer A80 and B62

Repair kits

We want to offer various and especially useful repair kits for the Studer A80 or B62. These include the complete relay set for the audio area, replacement kits for the recording and playback boards, repair kits for the audio cards or the drive control. Many of these replacement parts are specially made for us or by us, see ITT replacement relays, the best replacement for the hybrid amplifier A101 or the excellent EQ boards.
EQ, Relays und Hybridamp  revox-online
Revox A77 Rückansicht
Studer A80 Reproduce capacitor kit

Capacitors


In addition to the equalization, the hybrid amplifier module and all electrolytic capacitors were also replaced. The components should always be replaced on both record (1.080.982) or, as in the photo, on both reproduce circuit boards (1.080.986).
Revox A77 neue Verbindung

Repair kit

Here all electrolytic capacitors, transistors, the equalization board, the hybrid amplifier and the relay were replaced. - This is a general overhaul for us!
Ebay now offers a PCB that has been "overhauled by the seller" for € 333. In fact, only the relay was replaced!
Studer A80 repairkit Record PCB von revox-online
Studer A80 refurbished Record PCB

Old and new

Below, the reconditioned recording board with new audiophile electrolytic capacitors, low-noise transistors, SMD-equipped hybrid amplifiers, new equalization and the DIP relay. The record board is hardly recognizable!
In our understanding, this is a general overhaul!
This is the only way to give a full 1 year guarantee
Studer A80 spare parts
in our shop

Here you will find various spare parts for the Studer devices
Share by: